Are you looking for the Best Paint Sprayer For Oil Based Paint? If you are interested in buying the best paint sprayer in 2021, here are the top 5 best paint sprayer for oil based paint for 2021.
There are many reasons why amateurs and DIYers pick a paint sprayer over a brush or a roller? Paint sprayers are quicker, more efficient, and designed to take care of various interior and exterior coatings.
If you would like to apply oil-based paint in your bits of plastics, furniture, automobiles, you will need the best paint sprayer for oil based paint.
Most Recommended: Best Paint Sprayer for Oil Based Paint
- Control Paint Flow
- Color: Blue
- Weight: 26 pounds
- Warrenty: 1 Year
- 3 Spray Pattern
- Warrenty: On request
- Easy to use.
- Weight: 19 pounds
- Color: Blue
- Control Paint flow
- Warrenty: 1 year
However, an individual can become easily confused about the type of paint sprayer to choose, mainly if he is a novice. Many paint sprayers can be found on the current market, and if not careful, you may end up purchasing the wrong product and wasting your money.
If you are in a hurry then here is the list of top 5 best paint sprayer for oil based paint.
|Graco Magnum X7 Cart Airless Paint Sprayer – Best Airless Paint Sprayer||
|Neu Master 600 Watt High Power HVLP Home Electric Paint Spray Gun – Best HVLP Spray Gun||
|Graco Magnum X5 Stand Airless Paint Sprayer – Best Versatile Airless Paint Sprayer||
|Wagner Spraytech Control Spray Max HVLP Paint – Best For Deck Stain||
|Graco 17A466 TrueCoat 360 DS Paint Sprayer – Best for Adjustabilit||
Types of Paint Sprayers
Though there are various forms, paint sprayers are two fundamental types. Airless Sprayers and HVLP (High-pressure, Low Volume) sprayers.
Airless sprayers are fast and cover a large area. You can apply plenty of paint in a brief time. However, they create more overspray, resulting in waste in paint products. A considerable percentage of the paints wind up in the atmosphere.
HVLP sprayers, on the other hand, takes more time to cover an area, and they tend to clog up more readily. Furthermore, they are incompatible with latex paints and thick formulations such as lacquer. The fantastic thing about them is they conserve paints, as a result of their low-pressure level.
How to Spray Oil based paint.
Before you begin to spray oil-based paint, you will need to do particular things. Oil-based paints combine oils, chemicals, and solvents. Most times, this intricate mixture can be too thick to get a paint sprayer. Consequently, you want to narrow it out.
The dense nature of oil-based paints demands that you thin it out to decrease the viscosity level before you can use it on your spray gun. Doing so will prevent clogging the sprayer nozzle.
However, it would be helpful if you kept in mind that you can thin not all oil-based paints, and not all of them are thick for spray guns. When shopping, check to ensure that you obtain the right one that you use right in the spray gun or thinned for spray gun usage.
Oil based paints from other brands differ in viscosity and consistency. It would help if you made sure you read up the tag of every painting to understand the steps you are taking.
To thin oil-based paints, you want to recognize the more delicate for use. The directions on the paint can supply an answer to this. Most oil-based paints utilize either turpentine or mineral spirits.
It would help if you had the following to spray oil-based paints;
- Stirring sticks
- A funnel
- Oil-based paint
Steps: How to Spray Oil based Paint
Get a bucket and pour the paint into it through the strainer. This will catch any clumps of paint. If you do not have a filter, hunt through the paint and during any chunk you find.
Use the perfect paint-to-thinner ratio to the spray gun. For every three components of oil-based paint, add 1 part thinner. The paint has to be greater than the thinner to find the best colour shade.
Stir the thinner and the paint thoroughly with a clean wood stir rod. If this will slow you down, decide on a paint stirrer. This is a fantastic option, particularly when you have so much oil-based paint to blend.
To ensure that the paint is thinned enough for spray gun use, put the paint in the funnel. If it flows easily, you won’t have any issue using it on your paint sprayer. If it does not, add part thinner until it flows.
Pour the required amount into the spray gun. Bear in mind that the paint will look lighter in colour, so you will want to apply more coats than usual for the protective finish you want.
If you are spraying indoors, especially on latex paint, you want to use a primer. If spraying a cabinet, you may have to strip the paint off by trimming. As you sand between coats, spray satisfactorily but do not overspray.
Allow drying every time you spray. Thinned oil-based paints require a longer time to dry, making sure that you give yourself additional time. Don’t forget to paint in a ventilated areas, as this speeds up the drying period.
How to Thin Oil based Paint Without Paint Thinner?
That is one question that many DIYers and professionals inquire about. It’s common knowledge you have to thin oil-based paints with turpentine or mineral spirits for spray gun use, but can you lean oil-based paints without paint thinner? The answer is yes!
Popular paint thinners such as turpentine are poisonous and can cause skin reactions. Furthermore, using a lot of it’ll lower the sheen level of the paint. Because of this, they are opting for milder choices is probably the next best thing to do.
So what can you use to thin oil-based paints? You may use an oil (mix of linseed and lemon), kerosene, or mineral spirits. Provided that you use the ideal paint-to-thinner ratio and operate in a ventilated area, the result will be perfect.
To slim oil-based paint with an oil thinner, you need the following tools;
- Linseed oil and lemon
- Stirring stick
- Mixing bucket
- Oil based paint
Mix 1/4 cup lemon oil and a cup linseed oil into a mixing bucket. Stir the oils thoroughly with the stirring rod. Pour the mix into the paint gradually, stirring the stain with a pole as you keep on pouring.
After pouring the mix into the paint and stirring it, enable the paint to settle before employing it.
Can You Spray Oil Based Paint using an Airless Sprayer?
Yes, it is possible to spray oil-based paint using an airless sprayer. Airless sprayers pump paints about 3,000 PSI through a small hole at the gun’s tip. The trick on the spray gun divides the paint evenly into another pattern of tiny droplets.
For those who have big paint jobs to finish quickly, paint with an airless sprayer is the best solution. It sprays paint twice as fast as using a roller, brush, or am HVLP sprayer. Additionally, it guarantees a smooth finish on doors, cabinets, etc.
What Can I Use Instead of Turpentine for Oil Painting?
Turpentine is volatile and very odorous, even though they are effective. It is possible to use kerosene, peppermint and lemon oil, walnut oil as a substitute for turpentine in oil painting.
You may use any apparent oil instead of turpentine. These solvents will lower the viscosity of the paint, thereby facilitating a quicker drying procedure.
How to Thin Oil Paint with no Turpentine?
To thin oil paint without turpentine, you need the following:
- Kerosene, linseed oil, lemon, or some other clear oil.
- Oil paint
- Mixing paint
Pour the paint into the bucket through the strainer to catch any clumps of paint. If you do not have a filter, hunt through the paint and take any chunk you find.
For every three components of oil-based paint, add 1/2 cup kerosene to thin it. Stir the solvent and the stain thoroughly with a clean wood stir rod. In case you have so much oil-based paint to blend, use a paint stirrer.
If you would like to choose lemon, linseed oil, combine 1/4 cup lemon oil and a cup linseed oil into a mixing bucket. Stir the oils thoroughly with the stirring rod and pour in the paint.
To ensure that the paint is thinned enough for spray gun use, put the paint in the funnel. If it flows easily, you won’t have any issue using it on your paint sprayer. If it does not, add a second 1/2 cup kerosene or the lemon mix into the paint till it flows.
How to Use Linseed Oil and Turpentine in Oil Painting?
If the oil paint is too thick to make the desired finish, you will need some painting medium such as linseed oil and turpentine to mix with the paint.
Usually, oil paints consist of the pigment (colour ) and the medium, that’s the clear oil. But some paints have different pigments and mediums that don’t allow them to combine easily.
Using an excess moderate such as linseed oil and turpentine will even out the painting and make the colour blend you can apply to the canvas.
Linseed oil is a favourite oil medium that slows down the drying time of the paint. This is why it’s used chiefly for coating paintings, particularly after the first paint layer or base coat.
Turpentine, on the other hand, speeds up the drying period when blended with the oil paint. It dilutes the paint and disappears off. It is mainly used as the base coat or initial layer.
To use linseed oil and turpentine while painting:
Mix one part linseed oil with two components of turpentine. Place the mix into a glass container with a tight cap and let it sit for a couple of days. Linseed oil is thick and will not combine readily with turpentine. This is the reason you will need to wait a couple of days.
If you do not wait longer than average, you can substitute jojoba oil with poppy seed oil or walnut oil. These oils have a quicker drying time but tend to yellow over time.
During the waiting period, turn the container on its side and onto its upper every six hours to assist the linseed and turpentine blend well quicker.
Once mixed correctly, you can either pour a small amount into the paint and begin painting with an excellent paintbrush or dip your brush into the mix as you paint.
The advantage of using the mediums would be to make the paint more lasting, foster consistency and drying period, reach different sheens, and create smooth finishes. Bear in mind and you can opt to use the mediums individually or paint from the mix.
How to Clean a Paint Sprayer After Using Oil Based Paint?
After painting, the next thing to do would be to wash the paint sprayer. You have to clean the paint sprayer properly after using it to prolong the sprayer’s lifespan and prevent the nozzles from being obstructed.
Before you can begin cleaning the paint sprayer, You have to do the following:
- Turn off the power.
- Fix the sprayer’s pressure to the lowest possible setting.
- Press the trigger on the paint sprayer to make sure the pressure in the gun was relieved.
- Place the prime valve in the open place
- Remove the filter and the hints.
- After doing so, the next thing is to clean the spray gun. Below is the Way to start:
Mix water and paint thinner to clean the particles of paint in the vicinity of the sprayer. You could also use mild detergent and water to wash the sprayer. You can soak the suggestions and the filter from the water as you pass the other parts. Ensures that every piece is cleaned correctly.
If you use the water and paint thinner mix or mineral spirits to clean the ideas and filters, make sure you wash them with plain water to remove any residue.
Air-dry the suggestions and filter as you continue to wash the rest of the sprayer. After drying the recommendations and filter, it is time to clean the siphon tube. Remove the tube and flush out the paint inside.
While flushing the paint, use mineral spirits and water to dissolve stubborn stains. Flush the paint with the mineral soul, and then follow up with soap and water to flush the mineral soul.
Rinse the tube with clean water.
Now you’ve flushed the paint from the tube, and you want to clean the whole system out. Soak the siphon tube in a cleaning solution.
Turn the power on and activate the trigger. Keep it pressed until the cleaning fluid starts to flow from the spray gun.
Continue to pump the cleaning solution through the spray gun before the liquid is taken out of the gun. Turn off the power and off the sprayer.
What is the best paint sprayer for oil-based paint?
The best paint sprayer for an oil-based paint is Graco Magnum 262805 X7 Cart Airless Paint Sprayer. This potent airless sprayer possesses the qualities to deliver a superb painting finish most simplistically.
Can you use oil-based paint as a sprayer?
Yes, you may use oil-based paint as a sprayer. Paint sprayers are more potent than rollers and brushes and conserve paint to a large extent. Spraying oil-based paint will produce a professional-looking.
Are paint sprayers worth the money?
Paint sprayers are worth the money, even though it is not a suitable replacement for roller or brush. It would help if you considered using a paint sprayer for those who have a giant paint job to do and wish to conserve paint.
So Lets get started with the detail review of best paint sprayer for oil based paint one by one:
01. Graco Magnum X7 Cart Airless Paint Sprayer – Best Airless Paint Sprayer
There are many features of this Graco Magnum Pro X7 that are worth mentioning, but here are the best ones.
The Graco Guru X7 is offered in two rugged frame layouts. The cart or hi-boy cart design provides quality design and durable workmanship. The hi-boy layout is no longer available through Graco. Still, the cart offers two handles and wheels for effortless maneuverability. At only 23 pounds, this Graco is the best size to carry on several jobs.
Having a recommended annual return of 125 gallons, it’s strong enough to stand up to home exteriors, big decks, and sheds and outbuildings. Additionally, its 0.63 horsepower pump provides a dab of 3000 PSI, providing fast coverage and utilizing compact paints like latex.
Variable pressure control enables you to adjust output intensity based upon your spray coating or medium thickness requirements. At the same time, and included PowerFlush adapter allows you to connect the device to a garden hose after the job for no-clean cleaning. Problems.
This Graco X7 paint sprayer includes the 515 RAC IV spray tip. This is a reversible tip that will help keep you going throughout the unfortunate clog. Invert the trick, and the book material will be removed quickly. You may use up to some 0.017 spray tip on the Graco X7 so that you can update it later.
As with installation, the Graco Magnum X7 guide offers clear instructions on the best way to clean the machine after painting. Luckily, it is as straightforward as the installation procedure and requires much less time than rollers and brushes.
The procedure is so easy that even a beginner could figure it out. The X7 Magnum is the flagship sprayer at Graco’s Project Series, a product line targeted at the DIYer who wishes to improve their game and have a semi-professional unit. The X7 is a notch above the stand-mounted Magnum X5.
02. Neu Master 600 Watt High Power HVLP Home Electric Paint Spray Gun – Best HVLP Spray Gun
Although called a”professional” unit, the reality is that the economically priced NEU MASTER HVLP Home Electric Paint Spray Gun is a DIY machine for home improvement employees who sometimes need a sprayer.
The Max 600W Spray Painter is equipped with solid turbofans and motors to provide smooth and superior painting benefits. It’ll be your best assistant to paint ceilings, fences, cabinets, walls, etc.
A 6-foot hose together with a 6.6-foot power cord raises operational freedom. When these items should indicate that you don’t need to move the unit often, a handy handle on the top of the situation makes the NEU MASTER simple enough to transport.
The spray gun can be arranged into 3 spray patterns: flat, vertical, and circular, equipped with two dimensions nozzles (2.5mm / 3.0mm) for any painting project. A flow control knob can help the paint gun adjust to generate a fantastic spray.
The special spacing arrangement between the engine and the gun body produces this paint sprayer lighter than a manual spray gun. Added 6-foot hose and 6.6-foot electricity cable support long-distance jobs.
A 600-watt powerhouse offers enough grunt to power many different media, such as stains, sealers, enamels, polyurethanes, and acrylics. Just bear in mind that the latter may require thinning. Because the unit includes a viscosity cup, you can check the dilution requirements before filling.
Read Also: Top Commercial Paint Sprayers
03. Graco Magnum X5 Stand Airless Paint Sprayer – Best Versatile Airless Paint Sprayer
Graco Magnum X5 is one of the products of a top manufacturer in the Marketplace Graco. Graco offers a massive array of merchandise, from accessories, blast equipment, electrical pumps, sprayers, and much more.
Suppose you’re a homeowner with a medium-sized painting job and would instead save cash by doing it yourself. In that case, the Graco Magnum X5 Airless Sprayer might be the ideal option.
In conjunction with a RAC IV 515 nozzle, it can pump up to 0.27 GPM (gallons per minute). The flexible suction inlet tube works with inventory one gallon and five-gallon containers so that you won’t have to stop and refill regularly.
The main characteristic of this product is that it utilizes piston pumps rather than the conventional air compressor or compressor. The piston pump sucks the paint from the container and then pushes it through the hose to the spray gun.
The X5 has a powerful pump and manages to spray at a breakneck speed. Additionally, it utilizes stainless steel to make specific the pump in working condition for quite a long time.
The PowerFlush adapter is a feature that allows for effortless cleaning. All you will need to do is connect a garden hose rather than a link to a suction tube. Then turn on the sprayer, so the water runs through the whole sprayer to wash the interior.
The spray gun connects to the ground unit using a 25-foot DuraFlex hose. To spend less time going, a hose around 75 feet may be used without diminishing the quality of the finish or stressing the motor.
As part of this Graco collection of projects, using a medium intensity angle of usage, there’s a maximum recommended annual usage of 125 gallons. I would suggest it is more than enough to handle any job around a medium-sized residence.
The smaller size of the paint sprayer is another beautiful feature. There’s a more compact body with this sprayer than on others. Even though most HVLP sprayers mainly only spray guns, those with their tanks and pumps, such as the X5, tend to be a little hefty. However, Graco Magnum managed to make a compact body for this sprayer. Enough to fit in your back.
04. Wagner Spraytech Control Spray Max HVLP Paint – Best For Deck Stain
If you’re looking for a paint sprayer that is simple to use for finishing jobs, the Wagner 0518080 Control Max HVLP Sprayer could be appealing. Adjustable settings ensure it is suitable for just about any small to the medium job: doors, cabinets, trim, fences, or decks.
Although reasonably priced, this unit includes many features common to paint sprayers at the higher end of the scale.
• Provides a smooth, professional finish.
• The adjustability makes it useful for many different, more delicate projects.
• Can be used with varying density materials.
• Stationary base.
The Wagner 0518080 Control Max HVLP Sprayer also includes all the essential accessories: a professional quality 1-quart metallic cup, a 1.5-quart plastic paint container, a 20-foot hose, and a user manual.
Wagner has been producing quality tools for DIYers and professionals for over seven decades. The Wagner 0518080 is a part of the Control Series lineup of HVLP (high volume, low pressure) paint sprayers.
05. Graco 17A466 TrueCoat 360 DS Paint Sprayer – Best for Adjustability
The Graco 16Y385 is a high-quality paint sprayer that provides exceptional performance. It is no wonder it receives rave reviews from satisfied clients. With a massive selection of product options available on the current market, customers must pick the perfect machine that meets their precise needs.
An integrated stainless steel hydraulic pump should provide enough sound to expel most paint media without thinning. At the same time, the two-nozzle option permits you to switch between broad and narrow spray patterns.
The sprayer provides many significant advantages, including saving money and time. Property owners and managers no longer need to worry about hiring professional painters regularly. This can translate into savings of hundreds or thousands of dollars annually, dramatically reducing maintenance or remodeling costs.
This sprayer strikes 1500 PSI on high power, delivers about 12 gallons of media per hour, and includes an 18-inch power cable. And, if speaking about PSI and stress leaves you somewhat confused, have a look at my Stress Guide.
Additionally, the device lets you spray in any direction (vertical, horizontal, or inverted), making it ideal for aerial work like roofing, thus providing the machine its nickname of”360″.